混凝土含气量测定仪试验规程
试验步骤
1、将量钵内壁用湿布擦净,拌好的混凝土拌合物均匀适量地装入量钵内(混凝土大骨料粒径大于 40mm时,用湿筛法筛除),用振动台振实。振动台的频率、振幅和振动时间按各部颁布的试验规程中的规定进行,如混凝土采用人工捣实,可将拌合物分两层装料每层插捣25次。
2、刮去表面多余的混凝土拌合物,用抹刀抹平,并使表面光滑无气泡。
3、擦净量钵法兰顶面,将上盖盖上,上盖与量钵是靠法兰外园面定位,因此,两面要平齐。,再旋[ 紧固手柄 ] (操作时,应逐个螺栓轮换逐次旋紧,后4个螺栓全部旋紧)。
4、关闭[ 微调阀 ]打开和,由铜弯管向量钵注水,直到量钵所有空气从[ 排水排气阀 ]赶出直到出水为止。关闭[ 注水排水阀 ][ 排水排气阀 ]。
技术参数:
1、混凝土大骨料粒径不得大于40mm。
2、大含气量测定值10%
3、混凝土量钵尺寸,容积7L,内径与高度比为1∶1。
4、显示仪表:压力植量程0.1MPa、分度值0.005MPa、
5、含气量值量程10%,小读数0.1%.
本技术规格全部符合GT/T50080—2002国家标准。
我公司把顾客放在位,建立起了产品售、售中、售后服务规范,满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。
公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产品和服务。
我们热忱期盼与各位业内人士携手并进、共创未来!
Our company puts the customer first, establishes the product pre-sale, sale, after-sale service standard, satisfies the customer request, causes our product and the service to win the customer's trust deeply, has established the long-term cooperation and the mutual benefit relations with the customer. The company adheres to the principle of "regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and provide high-quality products and services for users under the protection of the network The Adjuster management system. We sincerely look forward to working with you to advance hand in hand and create the future!
混凝土含气量测定仪试验规程