多点式钢筋打印机使用方法
操作方法:
1、先确定标距,调整标距的方法是松开打印总成两侧的固定螺丝5毫米再把螺丝紧固
2、 提起银杆提升手柄④把钢筋调直放入V形槽内(罗纹钢直线边向上)紧团好。
3、落下手柄④旋转左端的小车轮,使锥杆处于低处,调整高度调节手柄⑧使锥尖接触钢筋后,再继续下调1—2毫米,以确保锥头有足够的打入钢筋的余量。4、提起手柄④接通电源,把方向开关拨到左行位置,开启电源开关,电源指示灯亮,如果打印总成在中途位置,工作指示灯也亮,同时打印总成行至左端而自动停止,工作指示灯灭。5、落下锥杆,把方向开关拨到右行位置,按一下右行按钮待电机正常运行后,松开按钮,打印总成行至右端,自动停止。
技术参数:
1、电源输入电压; 220V±l0
2、输入电流:0.2A
3、打印标距; 5mm 10mm
4、外形尺寸: 630×290×300mm
5、重量;约34公斤
备注:此产品分为三款:电动标距仪 手动标距仪 多点式标距仪
我公司把顾客放在位,建立起了产品售、售中、售后服务规范,满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。
公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产品和服务。
我们热忱期盼与各位业内人士携手并进、共创未来!
Our company puts the customer first, establishes the product pre-sale, sale, after-sale service standard, satisfies the customer request, causes our product and the service to win the customer's trust deeply, has established the long-term cooperation and the mutual benefit relations with the customer. The company adheres to the principle of "regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and provide high-quality products and services for users under the protection of the network The Adjuster management system. We sincerely look forward to working with you to advance hand in hand and create the future!
多点式钢筋打印机使用方法