钢筋锈蚀仪连接实验仪器
连接实验仪器:
按图B2.4连接实验装置,以一根钢筋作为阳接仪器的“研究”与“*号”接线孔,另一根钢筋为阴(即辅助电)接仪器的“辅助”接线孔,再将甘汞电的下端与钢筋阳的正中位置对准,与新鲜砂浆表面接触,并垂直于砂浆表面。甘汞电的导线接仪器的“参比”接线孔。在一些现代新型阳化仪或钢筋锈蚀仪,电输入导线通常为集束导线,只需按规定将三个夹子分别接阳钢筋、阴钢筋和甘汞电即可。
技术参数:
1、恒电位控制范围: -1.999V~ 1.999V(连续可调)
2、恒电位控制精度: 优于1mV(一般为0.1 mV);电网电压变化10%研究电控 --制电位变化小于1 mV
3、输出电流测量范围:0~±2mA、0~±20mA、0~±200mA(数字电流显示)
4、输出槽压: 0~±10V
5、恒电流控制范围:0~±200mA(连续可调,给定电流分三档量程,即±2mA, --±20mA,±200mA)
6、输出电位测量范围:-1.999V~ 1.999V
电位测量精度:±1%加减末位1个字
电流测量精度:±1.5%加减末位1个字
输入阻抗: >1010Ω
7、响应速度: ≤5μS
8、化方向: 阳化/阴化
9、外接给定电位: 可由外控信号给定电位电源: 交流220V±10%50HZ,功耗 --≤50W
10、汞电(232型或222型);
11、时钟;
12、线;铜芯塑料线;
13、缘涂料(石蜡:松香=9:1);
14、拌锅、搅拌铲;
15、模:塑料有底活动模(尺寸40mm×100mm×150mm)。
钢筋锈蚀仪用的符合本规程要求的钢筋锈蚀仪,(输出电流范围不小于0~200uA,可连续变电0~2V,精度≤1%;
我公司把顾客放在位,建立起了产品售、售中、售后服务规范,满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。
公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产品和服务。
我们热忱期盼与各位业内人士携手并进、共创未来!
Our company puts the customer first, establishes the product pre-sale, sale, after-sale service standard, satisfies the customer request, causes our product and the service to win the customer's trust deeply, has established the long-term cooperation and the mutual benefit relations with the customer. The company adheres to the principle of "regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and provide high-quality products and services for users under the protection of the network The Adjuster management system. We sincerely look forward to working with you to advance hand in hand and create the future!
钢筋锈蚀仪连接实验仪器