砼收缩膨胀仪如何计算收缩率可按下式计算收缩率: 收缩率:=(L1—L2)/L×1000mm/m 式中:L1~试件养护7天时的基准长度,单位mm L2~试件在各龄期的长度,单位mm L~有效长度,515mm 根据不同要求,收缩率可用百分率或微米/米表示之,如果试件收缩,则在计算结果加上“—”号。 试验结果应选取三个试件中接近的两个为准,计算平均值应准确到0.01mm/m。 制作试件所需附件自备:是献县鹏翼建筑仪器厂自行研发的新一代产品。流桌,捣棒(受压面积为35×35mm和15×15mm各一根),拌合锅、拌合铲、三角削平刀。 试件的制作和养护实验人员可参考有关国家标准和部颁标准,此处从略。
砼收缩膨胀仪如何计算收缩率技术参数: 1、 标准棒长度:L=540±0.02mm 2、 外形尺寸(长×宽×高):745×210×142mm 3、 试件尺寸100*100*515MM 4、 重量:约15Kg 我公司把顾客放在位,建立起了产品售、售中、售后服务规范,满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。 公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产品和服务。 我们热忱期盼与各位业内人士携手并进、共创未来! Our company puts the customer first, establishes the product pre-sale, sale, after-sale service standard, satisfies the customer request, causes our product and the service to win the customer's trust deeply, has established the long-term cooperation and the mutual benefit relations with the customer. The company adheres to the principle of "regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and provide high-quality products and services for users under the protection of the network The Adjuster management system. We sincerely look forward to working with you to advance hand in hand and create the future! 砼收缩膨胀仪如何计算收缩率 原创作者:河北献县鹏翼建筑仪器厂 |