锚杆拉拔仪检测锚杆检测锚杆 将油管与千斤顶连接,按上述1、2项要求进行油量、排气及压力表检查。 按图2所示,将拉杆(订货时注明规格或根据实际检测情况自备),拧到锚杆末端,如拉杆内螺纹外径大于油缸中心孔,可在油缸底部增加加长套,再套上液压缸(使活塞端向外),然后拧上螺母并顺时针拧紧卸荷阀。 1被测体 2锚具 3活塞 4液压缸 5加长套 压动油泵手柄,用力应均匀,不要用力过猛,当压力表上的读数达到要求时,停止加压。 注意,手动泵摆成水平放置工作。检查完毕应逆时针进针方向拧松泄阀,使压力表读数为零,再把各部件由锚杆上卸下。 如检测的锚杆或钢筋外端头没有螺纹,无法与拉杆连接时,可选我厂的MJ—1型6—38不同规格的锚具。
锚杆拉拔仪检测锚杆技术参数: 手压泵工作压力:60Mpa 重量:11kg 柱塞直径:高压28mm 低压:10mm 千斤顶工作能力:200KN 拉力行程:80mm 备注:本产品共有3种,10吨 20吨 30吨 指针式和数显式 我公司把顾客放在位,建立起了产品售、售中、售后服务规范,满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。 公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产品和服务。 我们热忱期盼与各位业内人士携手并进、共创未来! Our company puts the customer first, establishes the product pre-sale, sale, after-sale service standard, satisfies the customer request, causes our product and the service to win the customer's trust deeply, has established the long-term cooperation and the mutual benefit relations with the customer. The company adheres to the principle of "regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and provide high-quality products and services for users under the protection of the network The Adjuster management system. We sincerely look forward to working with you to advance hand in hand and create the future! 锚杆拉拔仪检测锚杆 原创作者:河北献县鹏翼建筑仪器厂 |